Quick answer
A useful outside garden tap needs a suitable supply connection, securely supported pipework and a position that makes watering and cleaning easier. For garden tap installations in Benoni, Fox Plumbing offers owner-led work by Evan Pretorius, a qualified registered plumber with more than 20 years’ experience, with the price agreed upfront.
When an extra garden tap makes sense
If watering means threading a hose through the house or stretching it across a driveway, a closer water point can make the job simpler. Choose the position around what you actually do outside: watering beds, washing garden tools or cleaning a courtyard.
A dripping or loose existing tap does not necessarily need moving or replacing entirely. First establish whether the fault is in the tap, its wall fixing or the pipe feeding it. Damp ground around the connection also needs investigation before adding another outlet.
- Your hose cannot reach the areas you use without joining several lengths.
- The current tap sits behind storage, planting or a locked gate.
- The tap twists when you attach a hose or operate the handle.
- You need a separate water point near a new garden or courtyard.
What affects the installation cost?
The main factors are the distance to a suitable supply pipe, access to that pipe and the route to the new tap. A short run along an accessible wall involves different work from a buried line beneath paving. Pipe sizing, isolation valves and any necessary backflow protection also affect the scope.
Ask whether trenching, lifting paving and making good are included before agreeing to the work. Fox Plumbing agrees the price upfront, and the call-out fee includes the first hour of work. Pensioners receive a special rate.
- Condition, size and accessibility of the existing supply.
- Length of pipework and the materials suitable for its route.
- Wall drilling, excavation and access beneath hard surfaces.
- Support brackets, isolation arrangements and backflow protection.
- Removal or safe disconnection of an old tap connection.
Planning an outdoor tap for a Benoni property
Benoni’s cold winter nights make exposed pipework worth planning carefully. Keep vulnerable pipe runs sheltered where practical and discuss insulation for exposed sections. Position the tap away from vehicle movement and where a hose can connect without bending sharply against the ground.
Think about where spilled water will go: avoid a position that repeatedly wets a doorway or leaves a slippery patch on a path. If your property has a rainwater tank or another non-municipal supply, identify the source clearly before work starts. These supplies must not be connected in a way that could contaminate drinking water.
- Allow enough clearance below the outlet for a bucket and hose connector.
- Keep the handle accessible after planting or landscaping changes.
- Discuss backflow protection, especially where hoses may enter pools or chemical containers.
- Check current municipal water restrictions before using the tap for watering or filling.
Book with Fox Plumbing
Fox Plumbing is based in Benoni and serves the East Rand and greater Gauteng. Owner Evan Pretorius is on the tools, is a member of IOPSA and PIRB, and issues Certificates of Compliance (COCs). Every job is insured; ask which compliance documentation applies to your installation.
Call or call 084 368 1879 to discuss the proposed tap position. Send photographs of the area and the nearest existing water point if possible. Working hours are Monday to Friday, 08:00–17:00, with Saturdays by appointment.
- Qualified registered plumber with more than 20 years’ experience.
- Owner on the tools and price agreed upfront.
- Call-out fee includes the first hour of work.
- Special rate for pensioners.
How we do the job
- 1
Choose a practical position
Identify the tasks the tap will serve, then check hose reach, bucket clearance, access to the handle and where splashed water will drain.
- 2
Assess the water supply
Check the available connection, pipe condition and size, and likely demand when other outlets are running. Establish any isolation and backflow protection requirements.
- 3
Agree the route and price
Confirm the pipe route, any digging or drilling, and responsibility for reinstating affected surfaces. Agree the price before work begins.
- 4
Fit the pipework and tap
Isolate the relevant supply, install suitable pipework and secure the outlet so normal hose use does not strain the joints. Protect exposed or buried sections as appropriate.
- 5
Test and hand over
Restore the supply, flush the new outlet and check the joints and tap operation for leaks. Explain how to isolate the tap and confirm any applicable compliance documentation.
Common questions
Can an existing garden tap be moved? +
Yes, where a suitable pipe route is available. The old connection needs to be properly disconnected or capped, and redundant pipework should be addressed rather than simply leaving the old tap shut.
Will another garden tap improve my water pressure? +
Not by itself. Flow depends on the incoming supply, pipe size, route and other outlets running at the same time. A shorter hose may reduce flow losses, but a new tap cannot fix an underlying supply problem.
Does fitting an outside tap always involve digging? +
No. An accessible supply and a suitable wall-mounted route may avoid excavation. Reaching a detached garden area or crossing paving can require digging; this should be established when planning the work.
Can I leave a hose connected all the time? +
Close the tap after use rather than relying on the hose nozzle to hold back the water. Disconnect and drain the hose when frost is expected, and never leave its end submerged in a pool, pond or chemical mixture.
What should I send when requesting an installation? +
Send your Benoni address, photographs of the desired position and nearby water points, and an approximate distance between them. Mention any paving, tank supply or existing pressure problems. Contact Fox Plumbing on 084 368 1879 by phone.
